Credit: INFC

Press Releases and News

October 11, 2016

Another Swing Bridge for Canam-Bridges

Another Swing Bridge for Canam-Bridges

Canam Group’s Quebec City plant will soon start working on 69 tons of steel components for the replacement of the Kingston Mills swing bridge in Ontario. The 85-foot-long (26 meters) single-span bridge stretches over part of the Colonel By Lake and the sluice portion of the Saint Lawrence River. A tight…

Read more

October 5, 2016

Goodco Z-Tech Products for the Regina Bypass

Goodco Z-Tech Products for the Regina Bypass

Canam-Bridges will provide different types of Goodco Z-Tech structural bearings and expansion joints for all the bridges and viaducts in the Regina Bypass project in Saskatchewan. Indeed, the business will provide 55 pot bearings, 50 laminated bearings, 787 feet (240 meters) of type 1 strip seal deck joints with multi-cell strip…

Read more

September 26, 2016

2016 TAC Conference: Canam-Bridges to give a joint lecture on metallizing

2016 TAC Conference: Canam-Bridges to give a joint lecture on metallizing

Maxime Ampleman, Jr. Eng., M.Sc. and Éric Lévesque, Eng., M.Sc. The annual conference and exhibition of the Transportation Association of Canada (TAC) will be held in Toronto, Ontario from September 25 to 28, 2016. During this event, a team made of Éric Lévesque, Project Services Manager and Maxime Ampleman,…

Read more

September 23, 2016

Goodco Z-Tech to Present Two Lectures at the 2016 IJBRC Congress

Goodco Z-Tech to Present Two Lectures at the 2016 IJBRC Congress

The International Joints and Bearings Research Council (IJBRC) will hold its 8th World Congress on joints, bearings and seismic systems for concrete structures in Atlanta, Georgia from September 25 to 29, 2016. At this event, Goodco Z-Tech, will present two lectures. Monday September 26, 2016 Speaker: Parinaz…

Read more

September 19, 2016

Canam-Bridges to Present a Case Study at the HMS 2016 Symposium

Canam-Bridges to Present a Case Study at the HMS 2016 Symposium

The 2016 Symposium of Heavy Movable Structures, Inc. (HMS) will take place from September 19 – 22, 2016 in Tampa, Florida. During this event, Éric Lévesque, Project Services Manager for Canam-Bridges will present a case study titled Hastings Swing Bridge-Orthotropic Steel Deck. The lecture will take place on Thursday, September…

Read more

August 30, 2016

A New York State Railroad Viaduct for Canam-Bridges

A New York State Railroad Viaduct for Canam-Bridges

Canam-Bridges will provide steel components for the replacement of the railroad viaduct spanning over Nott Street in Schenectady, New York. This viaduct originally built in 1905 has only one span and will require 265 tons of steel components including two through plate girders—the largest one being 122 feet…

Read more

August 22, 2016

Fore River Bridge Lift Span Erection

Fore River Bridge Lift Span Erection

The Fore River Bridge lift span in Massachusetts is longer than a football field and weighs almost three million pounds. The huge piece, fabricated at the Canam Group plant located in Point of Rocks, Maryland, was floated on a barge early in the morning of August 15, 2016. The span,…

Read more

August 17, 2016

New NY Bridge: The Four Towers on the Northern Span are Getting Close to Their Full 419-Foot Height

New NY Bridge: The Four Towers on the Northern Span are Getting Close to Their Full 419-Foot Height

Read the article ”Rising to the Top” published on the project website to learn more about the New NY Bridge towers construction which started in August 2015. See the project sheet Photo: New York State Thruway Authority

Read more

June 21, 2016

Canam-Bridges’ First Pieces Erected on the New Tappan Zee Bridge

Canam-Bridges’ First Pieces Erected on the New Tappan Zee Bridge

Canam-Bridges’ first pieces of steel being erected on the main span of the new Tappan Zee Bridge (New NY Bridge Project). The field section (pre-assembled deck section) is about 40 feet long and lift weight was about 340,000 lb. One field section completed… 99 more to go! Photo: Tappan Zee…

Read more

June 14, 2016

Île-des-Sœurs Bridge: First Girders Delivered!

Île-des-Sœurs Bridge: First Girders Delivered!

Canam-Bridges delivered its first girders for the Île-des-Sœurs Bridge in the scope of the new Champlain Bridge project in Montreal, Quebec. A total of 160 girders will be fabricated at the Canam Group plant located in Quebec City, QC and delivered for the Île-des-Sœurs Bridge. Erection will start…

Read more

June 9, 2016

An Industrial Catamaran to Build the New Champlain Bridge

An Industrial Catamaran to Build the New Champlain Bridge

If you are following the progress of the new Champlain Bridge construction project, this article on the use of an industrial catamaran to transport concrete footings to the bottom of the St. Lawrence River will interest you. The machine can lift and transport parts that can weigh up to 1,000 tons. Article…

Read more

June 6, 2016

Modern Steel Construction: 2016 Prize Bridge Awards Winners

Modern Steel Construction: 2016 Prize Bridge Awards Winners

The Modern Steel Magazine presented the winning projects of the 2016 Prize Bridge Awards. Canam-Bridges was involved in the Alexander Hamilton Bridge located in New York and the Memorial Bridge that links Portsmouth, New Hampshire and Kittery, Maine. Read articles on pages 36 and 49.

Read more

To top